proj makesail



`Converts a station into a profile component of SAIL part HOUSE
`Will do the same for more than one component if desired.



enter pm
`read house.gf  `<-- the GF containing the 1-station component(s)
`or create it here:
create house\house1.p  `<-- use .p if the station has "bow" to the right
class sail
loc @ -0.01 = 0,10, 10,10, 10,15, 13,20, -12,20, -11,18, -4,18, -4,10
inboard -12  `<-- must be at least as fsr negative as the station goes
/
display        `<-- just to see what we have
write house.gf1
clear
quit pm



`Note: The station must be the only station in a starboard or port-side
`      component.
`      This can be made using SE.  E.g.: SE house.gf1 (house\house1.p).



mc house.gf1 (house\house1.p) house.gf2 /profile /newgf
`mc house.gf1 (house\house2.p) house.gf2 /profile
`Note if only one component is involved, omit the second mc.



enter pm
read house.gf2
reverse  `<-- This is only necessary if the stations were reversed

             `    The reverse will make .P components into .S!

display
write house.gf2



`The rest of the vessel can be read in here and the combined result
`written to a new file.



clear
quit pm